you're punching buttons at remotecodelist.com

JVC-1623 (VCR Remote) Instructions

If you TV is JVC, no code is necessary. Some other JVC Remotes may not need the "0" zero in front of the # when programming.

PREPARATION

  1. Turn the TV's power OFF using the TV's Remote.
  2. Set the remote SWITCH (TV/CABLE/VCR) to TV (or CABLE if setting CABLE CODE)
  3. While holding down the POWER button, enter you TV's (or CABLE for Cable setting) brand code with the digit keys then press STOP
    1. Brand setting is completed. Once you set the brand, you don't have to reset until you replace the batteries.
    2. If you set the wrong code, re-enter theright code.
  4. Press the POWER button to turn the TV (Cable) power back on to check code.

OPERATION

  1. Set SWITCH to TV, operate TV.
    1. Power, TV/Video, Ch +/-, Vol +/-
  2. Set SWITCH to VCR to operate VCR.
  3. Set SWITCH to CABLE to operate CABLE Box.

TV Brand Name & Code

Code TV Brand Name
01 JVC
02 Magnavox
03 Mitsubishi
04,11 Panasonic
05 RCA
12 Samsung
13 Sanyo
13 Sears
06 Sharp
07 Sony
08 Toshiba
09 Zenith
10 Hitachi

Cable Box Brand name & Code

Code Cable Box Brand Name
01, 02, 03, 04, 05, 06, 07, 08 GI, Jerrold
09, 10 Scientific Atlanta
11, 12 Zenith
13, 14 Pioneer
15, 16, 17, 18 Hamlin, Regal
19, 20, 21 Sigma, Tocom
22, 23, 24, 25, 26  RCA, Panasonic, Sprucer